Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 14.501K SLD 5
MORE PAYLOAD THANKS TO INTELLIGENT LIGHTWEIGHT DESIGN
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
- Higher payloads due to intelligent lightweight design
Max. lifting moment | 14.6 |
Max. lifting capacity | 6200 |
Max. hydraulic outreach | 11.7 |
Slewing angle | 420° |
Slewing torque | 1.6 |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.74 |
Width folded | 2.55 |
Max. operating pressure | 360 |
Pump capacity | 50 - 70 l/min |
Dead weight (std.) | 1510 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Std | 14.6 mt | 5.2 m | 420 | 1.6 | 36.0 Mpa | 50-70 | 1510 kg | 2215 mm | 2550 mm | 740 mm | 5100 mm | - | 2900 kg |
A | 14.3 mt | 7.3 m | 420 | 1.6 | 36.0 Mpa | 50-70 | 1660 kg | 2215 mm | 2550 mm | 740 mm | 7200 mm | - | 1940 kg |
B | 14.0 mt | 9.5 m | 420 | 1.6 | 36.0 Mpa | 50-70 | 1780 kg | 2215 mm | 2550 mm | 740 mm | 9400 mm | - | 1380 kg |
C | 13.7 mt | 11.7 m | 420 | 1.6 | 36.0 Mpa | 50-70 | 1890 kg | 2215 mm | 2550 mm | 740 mm | 11600 mm | - | 1020 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.